SIX CHUTER PPC MAIN GEAR SHOCKS

Home > AIRCRAFT SHOCKS > SIX CHUTER PPC AIRCRAFT >

Alternative Views:

Our Price: $895.00

Product Code: 201-23

MODEL

SHOCK BODY COLOR

Qty:

Description

For any questions:

[email protected]
(916) 886-3159

Nitrogen charged air strut assembly. Light weight but not light on performance. Our custom valved air struts are designed for Six Chuter PPC's but may fit many other manufactures and models.

This package includes 2 main gear shock assemblies.

If you'd like to eliminate the danger of slack lines from a hard landing with a bounce, these shocks are for you! Increase your margin of safety by upgrading your suspension with a pair of Shock Monster 2.0 shocks.

Improved performance in rough terrain as well is less stress on your body and aircraft from a hard landing during a gust or changing wind. Make safer landings ever time when the shock absorbs the vertical energy and keeps you on the ground.

Available for these models:

P-3 Lite

Legend

Paragon

Skyeryder II AB

Six Chuter has these shocks in stock and read your for immediate delivery. Use this link to the Six Chuter store......

http://sixchuter.mybigcommerce.com/monster-shock/

If you have a PPC that uses a similar suspension system and you'd like to see how Shock Monster can help your landings, call or email us for more information.

4.50 inches of travel. Special shaft and piston design allows for the best compression ratio and most radical valving anyone has seen in aviation.

The top mounting bolt spacing is typically 1.50" from inside of brace too inside of bracket. The lower is typically 1.75". We prefer to use an AN6 (.375") bolt when upgrading to the Shock Monster shocks. This is the correct size bolt for the vertical energy these shocks can take.

Just before shipping we will ask to confirm the bolt to bolt length your Six Chuter requires. The measurement we want is a static resting length with the tires square to the ground (no camber of the tires). To get this measurement you may need to ask a friend to sit in the seat or add some weight until the tires are square.

We're offering you a product with limitless adjustments. Each pilot may like a setting slightly different from each other. You won't know exactly what you like the most until you've tried them.....so we'll send you something in the middle. One you have the length we'll be sure to make as many of the tuning adjustments before shipping to minimize your work in installation.

Extension tubes can be custom designed allowing fitment to most any airframe. These shocks are aircraft aluminum with ever bit of weight savings and strength designed right in. insanely light weight and no coil springs required.

High strength Aircraft grade aluminum components.
9 hole completely revalveable piston design.
Chromoly rod end bearings.
Dual seals and dual o-ring used to ensure proper sealing and long life.

Get the best!

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AIRCRAFT SHOCKS > SIX CHUTER PPC AIRCRAFT

	SHOCK SEAL AND O RING KIT $75.00
	3/4" ROD END KIT $40.00
	UTV REAR SWAY BAR KITS $499.00