Home > OFF-ROAD SWAY BARS > JEEP KITS >

JEEP JK REAR SWAY BAR KIT
JEEP JK REAR SWAY BAR KIT
 
Our Price: $599.00



Availability:: Usually Ships in 24 to 72 Hours
Product Code: JJK2

END CAP KIT


SWAY BAR SIZE & TYPE


CURRENT LIFT KIT



Qty:  
Description
 
JEEP JK REAR SWAY BAR KIT

INCLUDES:

SWAY BAR
SWAY BAR MOUNTING BRACKET KIT (WELDED)
DOUBLE SHEAR ARMS
SPLINED BLOCKS
BUSHINGS
END LINK KIT
HARDWARE PACK

THE UPPER ROD END FOR THE END LINK KIT IS DOUBLE SHEAR. THE LOWER ROD END IS SINGLE SHEAR AND CONNECTS TO THE STOCK AXLE MOUNT.IF YOU HAVE A CUSTOM AXLE HOUSING AND NEED AN AXLE TAB, INCLUDE A SHORT NOTE ON YOUR ORDER PAGE REQUESTING THE ADDITIONAL WELD TABS.

THE MOUNTING BRACKETS BOLT TO THE FRAME USING THE STOCK BUMPER BOLTS.

SMALL INNER FENDER SHEET METAL TRIMMING REQUIRED TO GET THE BAR BETWEEN THE FRAME AND BODY UNLESS YOU HAVE A BODY LIFT. YOU'LL REMOVE ABOUT A 3/8" X 1-1/2" STRIP OF SHEET METAL FOR CLEARANCE.

REAR BRAKE HOSE MOUNTING TABS NEED RELOCATING, INCLUDED IN KIT IS TWO SELF TAPING SCREWS. BY HAND YOU CAN PUT A SMALL BEND IN THE BRAKE HOSE TUBE TO MOVE IT FORWARD OF THE SWAY BAR ARM. THEN USE THE INCLUDED SCREWS TO SECURE THE TAB TO THE FRAME.

THE END LINKS FOR THIS KIT AND ANODIZED ALUMINUM RODS CUT TO LENGTH AND THREADED FOR THE ROD ENDS. THESE RODS AND BE CUT TO SHORTEN THEIR LENGTH. IF YOU HAVE AN ODD INSTALLATION AND NEED A DIY END LINK KIT, REQUEST A WELD TOGETHER STEEL END LINK TUBE KIT AVAILABLE AT NO ADDITIONAL COST.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

OFF-ROAD SWAY BARS > JEEP KITS


TAYLORCRAFT BC-12 LANDING GEAR (NO SHOCKS) $2,300.00