ULTIMATE TAILWHEEL!

So what we did was develop the ultimate complete tailwheel assembly. One stop shopping! We start with a complete in-house built Shock Monster Shock, arm, airframe mount, fork, and steering assembly. Then we give you 4 choices on tire/wheel sizes for one complete package.

And we've got a few more options for you. If you already have a baby bush wheel and you want to run it, no problem. We let you delete the wheel and tire from the package. Or if you already have a dual arm Matco tailwheel assembly, no problem. We let you delete the fork, steering, tire, and wheel from the package and run your current parts.

Available for a ton of aircraft with more rolling out daily!

We've been selling and flying these tailwheel assemblies for the past 2 years but in very limited availability. We simply didn't have enough capacity in our shop to manufacture enough and we hate back orders. Haas CNC has filled our orders for more machines and now were at full speed on the Ultimate Tailwheel.

Fully adjustable spring rate. Fully adjustable caster angle, Fully adjustable tension break out. Full steering and castering when you need to swing the tail around.

One more trick..... you can purchase a short tailwheel with your package and also add a large tailwheel and side forks only to give yourself height option. You don't have to buy a completely new tailwheel assembly and you don't even have to remove the fork to install the larger tire. Just swap the fork sides and your tire package to switch diameters. Everything is interchangeable. Genius!

Aluminum mount, arm, fork, and Shock Monster Shock. The axle is heat treated chromoly. Available in black, black, or black!

Welcome to the Shock Monster family.

For any questions:

tony@tk1racing.com
(916) 806-8575

KITFOX MODEL 1-3 GEAR LEG PACKAGE

includes 1.75 shock package

INCLUDES LEFT AND RIGHT GEAR LEGS AND CABANE

**** SHOCKS AVAILABLE SEPARATELY FOR THIS PACKAGE ****

FRONT AND GEAR TUBES ARE 1.25 X .058 WALL CHROMOLY TUBING.
BILLET CHROMOLY UPPER FITTINGS.

BOLT IN AXLE DESIGN.

POWDER COATED BLACK.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

For any questions:

tony@tk1racing.com
(916) 806-8575

KITFOX MODEL 4 GEAR LEG PACKAGE

includes 1.75 shocks

THIS GEAR LEG PACKAGE IS WIDER AND TALLER THAN THE STANDARD BUNGEE TYPE STOCK KITFOX GEAR. INCREASED HEIGHT IN THE GEAR ALLOW FOR A HIGHER ANGLE OF ATTACK AND THE ABILITY TO ROTATE SOONER FOR A SHORTER TAKE OFF. THE HIGHER AOA ALSO ALLOWS FOR A LONGER HIGHER FLAIR FOR A SHORTER LANDING.

THIS KIT BOLTS TO THE FACTORY FRONT FLOAT FITTING AND REAR GEAR LEG FITTING. THIS MOVES THE AXLES FORWARD ABOUT 3” ALLOWING FOR INCREASED TAIL WEIGHT AND MORE AGGRESSIVE BRAKING.

SOME GRINDING IS REQUIRED ON THE CABANE TO MAKE IT FIT PERFECTLY TO THE STOCK AIRFRAME MOUNTS. GENERALLY THIS SHOULD TAKE YOU NO MORE THAN 10 MINUTES PER SIDE. GEAR LEGS BOLT IN AND REQUIRE NO WELDING OR CUTTING.

**** SHOCKS AVAILABLE SEPARATELY FOR THIS PACKAGE ***

INCLUDES LEFT AND RIGHT GEAR LEGS AND CABANE

1.25 AXLES INCLUDED IN THIS KIT.

FRONT AND GEAR TUBES ARE 1.25 X .058 WALL CHROMOLY TUBING.
BILLET CHROMOLY UPPER FITTINGS.

BOLT IN AXLE DESIGN.

POWDER COATED BLACK.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

For any questions:

tony@tk1racing.com
(916) 806-8575

KITFOX MODEL 5 GEAR LEG PACKAGE

THIS GEAR LEG KIT IS TALLER AND WIDER THAN THE FACTORY KITFOX STI GEAR LEG PACKAGE. BOTH, OUR KIT AND THE FACTORY STI KIT ARE AN EXCELLENT CHOICE OVER YOUR ALUMINUM SPRING GEAR AND NOW YOU’VE GOT OPTIONS......HIGH AOA OR GOOD VISIBILITY OVER THE NOSE. PICK THE KIT THAT BEST FITS YOUR TYPE OF ADVENTURE.

**** SHOCKS FOR THIS GEAR LEG PACKAGE AVAILABLE SEPARATELY ****

INCLUDES LEFT AND RIGHT GEAR LEGS AND CABANE

1.25” AXLES INCLUDED IN KIT.

FRONT AND GEAR TUBES ARE 1.25 X .058 WALL CHROMOLY TUBING.
BILLET CHROMOLY UPPER FITTINGS.

BOLT IN AXLE DESIGN.

POWDER COATED BLACK.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

For any questions:

tony@tk1racing.com
(916) 806-8575

KITFOX MODEL 7 GEAR LEG PACKAGE

THIS GEAR LEG KIT IS TALLER AND WIDER THAN THE FACTORY KITFOX STI GEAR LEG PACKAGE.

ARE YOU READY FOR THE ULTIMATE KITFOX LANDING GEAR PACKAGE......THIS IS IT! THERE'S NOTHING MORE IMPORTANT WHEN YOU'RE FLYING THE BACK COUNTRY THEN HAVING THE STRONGEST, LIGHTEST, BEST BUILD LANDING GEAR PACKAGE WITH SHOCKS THAT'LL TAKE THE BIGGEST HIT. THAT'S WHAT KEEPS YOU AND YOUR AIRCRAFT SAFE. TRUST THE BEST.......SHOCK MONSTER.

THIS IS A BOLT ON KIT THAT INCLUDES GEAR LEGS WITH MUCH LARGER DIAMETER TUBES, STRONGER CABANE VEE, AIRFRAME MOUNTS, SHOCK MONSTER 2.0 SHOCK KIT, AND YOUR CHOICE OF AXLES.

FRONT GEAR LEG TUBES ARE 1.50 X .058 WALL AND REAR GEAR LEG TUBES ARE 1.25 X .058 WALL CHROMOLY TUBING.
BILLET CHROMOLY UPPER FITTINGS.

BOLT IN AXLE DESIGN.

POWDER COATED BLACK.

ANGLE OF ATTACH IS EVERYTHING WHEN TRYING TO GET IN AND OUT IN A SHORT DISTANCE. DON'T SETTLE FOR SHORT LEG SYNDROME.

IF YOU'RE LOOKING TO SPICE UP YOUR KITFOX, TAKE A LOOK AT THE SUPER STEPS, BRAKE HOSE KITS, AND SAFETY ROPES.

FLY WITH THE BEST......SHOCK MONSTER.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.