ULTIMATE TAILWHEEL!

So what we did was develop the ultimate complete tailwheel assembly. One stop shopping! We start with a complete in-house built Shock Monster Shock, arm, airframe mount, fork, and steering assembly. Then we give you 4 choices on tire/wheel sizes for one complete package.

And we've got a few more options for you. If you already have a baby bush wheel and you want to run it, no problem. We let you delete the wheel and tire from the package. Or if you already have a dual arm Matco tailwheel assembly, no problem. We let you delete the fork, steering, tire, and wheel from the package and run your current parts.

Available for a ton of aircraft with more rolling out daily!

We've been selling and flying these tailwheel assemblies for the past 2 years but in very limited availability. We simply didn't have enough capacity in our shop to manufacture enough and we hate back orders. Haas CNC has filled our orders for more machines and now were at full speed on the Ultimate Tailwheel.

Fully adjustable spring rate. Fully adjustable caster angle, Fully adjustable tension break out. Full steering and castering when you need to swing the tail around.

One more trick..... you can purchase a short tailwheel with your package and also add a large tailwheel and side forks only to give yourself height option. You don't have to buy a completely new tailwheel assembly and you don't even have to remove the fork to install the larger tire. Just swap the fork sides and your tire package to switch diameters. Everything is interchangeable. Genius!

Aluminum mount, arm, fork, and Shock Monster Shock. The axle is heat treated chromoly. Available in black, black, or black!

Welcome to the Shock Monster family.

For any questions:

tony@tk1racing.com
(916) 806-8575

UPDATE THAT SHOCK CUB!

FORGET THOSE LITTLE SHAFT SHOCKS. GO BIG AND PROTECT YOURSELF!

PACKAGE INCLUDES A PAIR OF 2.0” SHOCK ASSEMBLIES

LIGHT IN WEIGHT BUT NOT LIGHT IN PERFORMANCE. THESE SHOCKS TAKE THE BOUNCE OUT OF YOUR LANDINGS WHILE PROTECTING YOU AND YOUR AIRFRAME FROM A HARD LANDING THAT COULD RUIN YOUR DAY AND YOUR PLANE.

FULLY ADJUSTABLE FOR SAG (DROOP) GIVES YOU THE FLEXIBILITY TO SET THEM THE WAY YOU LIKE THEM.

11” OF SHOCK TRAVEL GIVES YOU 18-20” OF TIRE TRAVEL

NITROGEN SETS YOUR TAXI HEIGHT AND OIL DOES THE DAMPENING THROUGH A STATE OF THE ART 9 HOLE PISTON ASSEMBLY JUST LIKE OUR OFF-ROAD RACING SHOCKS.

SHOCKS ARE BLACK ANODIZED ALUMINUM. BUILT RIGHT AND BUILT 100 PERCENT BY SHOCK MONSTER IN THE USA.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

2.50 SHOCK MONSTER PORTER STYLE SHOCKS

THESE FIT THE 2023 AND NEWER ZLIN NORDEN CUBS. THE AIRFRAME MOUNTING TABS ARE AT THE LOWER SIDE OF THE DOOR AND CONNECT WIDE ON THE GEAR LEG.

THESE SHOCKS ARE AVAILABLE IN MULTIPLE COLORS.

INCLUDES BEARING SPACERS FOR 3/8 (AN6) BOLTS AND A 1-1/8" WIDTH

For any questions:

tony@tk1racing.com
(916) 806-8575

UPDATE THAT SAVAGE CUB!

FORGET THE BUNGEES AND LETS TURN THAT CUB INTO A REAL BACKCOUNTRY CAPABILE BUSH PLANE.

PACKAGE INCLUDES A PAIR OF 2.0” SHOCK STRUT ASSEMBLIES

LIGHT IN WEIGHT BUT NOT LIGHT IN PERFORMANCE. THESE DUAL SHOCK STRUTS TAKE THE BOUNCE OUT OF YOUR LANDINGS WHILE PROTECTING YOU AND YOUR AIRFRAME FROM A HARD LANDING THAT COULD RUIN YOUR DAY AND YOUR PLANE.

FULLY ADJUSTABLE FOR LENGTH GIVES YOU THE FLEXIBILITY TO USE YOUR SHOCKS ON MULTIPLE LENGTHS OF LANDING GEAR.

4.75” OF SHOCK TRAVEL GIVES YOU 12-14” OF TIRE TRAVEL

HOW DOES IT WORK? SIMPLE........WE CONVERT THE TENSION MOTION THAT OCCURS DURING LANDING AND TURN THAT INTO A COMPRESSION MOTION WITH THE USE OF THE FRAMES. THEN A PAIR OF INSANELY LIGHT WEIGHT SHOCKS MANAGE THE FORCE AND REBOUND ENERGY TO KEEP YOU ON THE GROUND AND IN CONTROL. NITROGEN SETS YOUR TAXI HEIGHT AND OIL DOES THE DAMPENING THROUGH A STATE OF THE ART 9 HOLE PISTON ASSEMBLY JUST LIKE OUR OFF-ROAD RACING SHOCKS.

SHOCKS ARE BLACK ANODIZED ALUMINUM. THE FRAMES ARE NICKEL PLATED AND BLACK POWDER COATED CHROMOLY TUBING. ALL OUR ASSEMBLIES USE VERY LIGHT WEIGHT CNC FITTINGS AND THE HIGHEST QUALITY TIG WELDING. BUILT RIGHT AND BUILT 100 PERCENT BY SHOCK MONSTER IN THE USA.\

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.