ULTIMATE TAILWHEEL!

So what we did was develop the ultimate complete tailwheel assembly. One stop shopping! We start with a complete in-house built Shock Monster Shock, arm, airframe mount, fork, and steering assembly. Then we give you 4 choices on tire/wheel sizes for one complete package.

And we've got a few more options for you. If you already have a baby bush wheel and you want to run it, no problem. We let you delete the wheel and tire from the package. Or if you already have a dual arm Matco tailwheel assembly, no problem. We let you delete the fork, steering, tire, and wheel from the package and run your current parts.

Available for a ton of aircraft with more rolling out daily!

We've been selling and flying these tailwheel assemblies for the past 2 years but in very limited availability. We simply didn't have enough capacity in our shop to manufacture enough and we hate back orders. Haas CNC has filled our orders for more machines and now were at full speed on the Ultimate Tailwheel.

Fully adjustable spring rate. Fully adjustable caster angle, Fully adjustable tension break out. Full steering and castering when you need to swing the tail around.

One more trick..... you can purchase a short tailwheel with your package and also add a large tailwheel and side forks only to give yourself height option. You don't have to buy a completely new tailwheel assembly and you don't even have to remove the fork to install the larger tire. Just swap the fork sides and your tire package to switch diameters. Everything is interchangeable. Genius!

Aluminum mount, arm, fork, and Shock Monster Shock. The axle is heat treated chromoly. Available in black, black, or black!

Welcome to the Shock Monster family.

For any questions:

tony@tk1racing.com
(916) 806-8575

The complete kit!

You get a pair of Shock Monster gear legs, Cabane vee kit, Pair of Shock Monster shocks, and all the hardware.

This is designed to be a bolt on kit. The cabane mounts to the front gear leg fittings. Some drilling will be required and the cabane ears will need slight trimming with a 4" grinder to fit tight to the factory gear leg fittings.

This package includes our 1.75" shock package

4.75" shock travel is 12-14" at the tire.

fully adjustable for length.

Light weight but not light on performance. Our custom valved air shocks are designed for bush planes looking for the harshest landing zones this planet has to offer. Our special shaft and piston design allows for the best compression ratio and most radical valving anyone has seen in aviation. These shocks are aircraft aluminum with ever bit of weight savings and strength designed right in.

Black anodized aluminum shocks. Nickel plated chromoly heat treated steel frames for incredible strength and beauty then powder coated black for additional corrosion resistance.


How does it work? Simple......we convert the tension motion that occurs during landing and turn that into a compression motion with the use of the frames. Then the shocks manage the force and rebound energy to keep you on the ground and in control. Nitogen sets your taxi height and oil does the dampening.


*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

For any questions:

tony@tk1racing.com
(916) 806-8575

The complete kit!

You get a pair of Shock Monster gear legs, Cabane vee kit, Pair of Shock Monster shocks, and all the hardware.

This is designed to be a bolt on kit. The cabane mounts to the front gear leg fittings. Some drilling will be required and the cabane ears will need slight trimming with a 4" grinder to fit tight to the factory gear leg fittings.

This package includes our 1.75" shock package.

Included 1.25 axles but if you need some other size, they can be exchanged for another size.

No coil springs required
Redundant dual shock design always keep you safe
Aircraft grade aluminum body - black anodized finish
The chromoly frames that hold the shocks are nickel plated and powder coated black
Superior cooling thermo-action aluminum shaft
High strength 9 hole completely revalveable piston design
Nitrogen sets the aircraft height and the oil does the dampening.

Currently available for experimental aircraft.

How does it work? Simple......we convert the tension motion that occurs during landing and turn that into a compression motion with the use of the frames. Then the shocks manage the force and rebound energy to keep you on the ground and in control.

*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.

For any questions:

tony@tk1racing.com
(916) 806-8575

The complete kit!

You get a pair of Shock Monster gear legs, Cabane vee kit, Pair of Shock Monster shocks, and all the hardware.

This is designed to be a bolt on kit. The cabane mounts to the front gear leg fittings. Some drilling will be required and the cabane ears will need slight trimming with a 4" grinder to fit tight to the factory gear leg fittings.

This package includes our 2.0" shock package.

Included 1.25 axles but if you need some other size, they can be exchanged for another size.

No coil springs required
Redundant dual shock design always keep you safe
Aircraft grade aluminum body - black anodized finish
The chromoly frames that hold the shocks are nickel plated and powder coated black
Superior cooling thermo-action aluminum shaft
High strength 9 hole completely revalveable piston design
Nitrogen sets the aircraft height and the oil does the dampening.

Currently available for experimental aircraft.

How does it work? Simple......we convert the tension motion that occurs during landing and turn that into a compression motion with the use of the frames. Then the shocks manage the force and rebound energy to keep you on the ground and in control.


*** WARNINGS:
1. ALL AUTOMOTIVE PARTS NOT FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED VEHICLES.
2. ALL AUTOMOTIVE PARTS FOR OFFROAD USE ONLY. OWNER/INSTALLER ASSUMES ALL RISKS.
3. DRIVING CHARACTERISTICS OF YOUR VEHICLE MAY CHANGE. USE CAUTION.
4. WARNING: CANCER @REPRODUCTIVE HARM.
5. IN CALIFORNIA, SOME PARTS MAY CAUSE CANCER. SEE WWW.P65WARNING.GOV.
6. ALL AIRCRAFT PARTS NOT FOR USE ON TYPE CERTIFICATED AIRCRAFT. NO STC OR PMA INCLUDED.
7. OWNER/INSTALLER ASSUMES ALL RISKS.
8. EXPERIMENTAL AIRCRAFT AND EXPERIMENTAL EXHIBITION AIRCRAFT ONLY.
9. FLYING/LANDING CHARACTERISTICS MAY CHANGE. USE CAUTION.
10. OFF AIRPORT OPERATIONS MAY BE DANGEROUS. PROCEED WITH PROPER TRAINING AND CAUTION.